Raw Material for Adhesives Industry
Acrylic Sealant | With good adhesion to most building material surface without primer. |
C5 Hydrocarbon Resin | |
C6 Hydrocarbon Resin | |
Ethylene Vinyl Acetate Copolymers | To be the popular one of EVA for making hot melt. Applications : Hot melt adhesives. |
Styrene | Butadiene block copolymer specifically designed for hot melt and for solvent based adhesive applications. Typical Application Transparent Shoe Soles, Plastic Modification, Adhesives, Mechanical Parts, Compounding For Modification. |
Styrene | Isoprene block copolymer specifically designed for hot melt and for solvent based adhesive applications. |
CR Latex | It is an anionization chloroprene latex. Application : For shoes adhesive and others. |
PU binder for wood | It is widely applied in wood to get a adhesive with fabric. |
Polishing Agent | It is widely applied in glass to provide a polish appearance and improve its printing fastness on its surface. It also can be used coating on fabric, plastic and leather. To spray the BENLON 9232 to the glass directly |
Paste Agent | It is widely applied in pasting on textile fabric, wood, metal, marble, paper, foam, leather, rubber and plastic material. It can be used direct by rolling, brushing or spraying. |
Adhesive | It is a self-crosslinking resin to be used in bonding the fabric. It can be used in nylon and PU foam binding. |
Laminating Adhesive | It is a ready-to-use, waterborne acrylic adhesive designed for use in the manufacture of flexible film laminates for food packaging. It is also suitable for use in non-food applications where similar films and performance requirements apply. This one-part, formaldehyde-free, all-acrylic adhesive can be applied by conventional gravure cylinder coating techniques. It is to laminate a variety of substrates including treated polyolefins, treated polyesters. It will have good adhesion to both metalized films and transparent films. These laminations are intended for snack foods, dry food and other general performance packaging. Other application uses are possible, subject to performance trials and testing. |
Adhesive | It is a self-cross-linking water base copolymer to be used as adhesive. |
Bopp Adhesive | It is an emulsion polymer suitable for high performance OPP packaging tapes and stationary tapes. It features excellent balance of peel, tack and cohesion properties, low foaming, easy operation and good aging resistance. |
Bopp Adhesive | It is an acrylic copolymer emulsion which is specially designed for BOPP Packing and stationery tape. It can compatible with pigment paste very well, and also could get unique balance ofadhesion performances in final product. It is suitable for Mayer Bar or Comma or Reverse coating machine. It is used in packing tape and stationery tape. |
GORE-TEX Glue | It is an eco-friendly moisture curing hot melt glue to be used as an Adhesive on fabric such as nylon, polyester and TPU film |
TPU Resin | Its fluidity is good, well controlled viscosity, good workability and low melting point. Excellent bonding strength for TPU, PVC, Nylon, Polyester. Application : Hot melt adhesive film, sealing tape, textile lamination |
TPU Resin | It is widely applied in footwear lamination and textile lamination. |
We also offer the following products which can be classified into six parts such as Casting PU Raw Material, TPU Granule, PU Adhesive and Hot Melt, Tube & Hose, PU Belting and PU Moulded Parts.
Casting PU Raw Material | It includes hot casting PU materials (the material needs heat for curing), cold casting PU materials (the material can be cured at room temperature), Polyurea spraying material (fast-cure waterproof material), Doming PU and Urethane Rubber. |
TPU Granule | It includes injection moulding, extrusion moulding and calendering moulding materials. The materials are supplied in a wide range of hardness. |
PU Adhesive & Hot Melt | It includes a variety of PU based adhesives: TPU for solvent based adhesive (pellet form), TPU for hot melt adhesive (pellet form), water based PU adhesive (liquid form), solvent based PU adhesive (liquid form), PUR hot melt adhesive (solid form), moisture curing binder (liquid form), hardener for adhesive and phenolic resin for adhesive tackifier. |
Tube & Hose | It includes PU tube, Nylon tube, Teflon tube, PE tube and Silicone tube. PU and Nylon tubes can be supplied in straight shape and spiral shape. We can recommend the suitable tube according to customer’s usage condition and application. |
PU Belting | It includes smooth round belt, rough belt, V belt, pentagon belt, endless round belt and hollow belt. The belts are mainly used on transmission. |
PU Moulded Parts | We produce PU finished products according to customer’ s desired requirement and shape. The process can be injection, extrusion, casting and so on. |